Generation Plant Engineer II / III / Senior

Summary

The Engineering II /III /Senior roles progress in scope, independence, and technical authority. The Engineer II performs engineering design, modifications, and economic and analytical support with general guidance, applying established engineering methods while developing technical judgment and providing limited guidance to others. The Engineer III builds on this foundation by working more independently, contributing to long range system planning, proposals, and presentations, and taking increased responsibility for technical decisions and interpretations while regularly providing technical leadership. The Engineer Senior applies in depth expertise to highly complex projects and emergent issues, serves as a recognized technical authority with broad or specialized knowledge, establishes the most effective solutions, and is relied upon for final technical decisions with work reviewed primarily for long term results rather than methods. 

Minimum Requirements

Engineer II

• A four-year Bachelors degree in an engineering discipline or related applied science discipline (see approved list) from an ABET accredited institution, an International Engineering Alliance (IEA) recognized institution or an ABET Mutual Recognition Agreement (MRA)
• Plus two (2) years working experience in Engineering-related positions.  

Engineer III 

• A four-year Bachelors degree in an engineering discipline or related applied science discipline (see approved list) from an ABET accredited institution, an International Engineering Alliance (IEA) recognized institution or an ABET Mutual Recognition Agreement (MRA)
• Plus five (5) years working experience in Engineering-related positions.  

Engineer Senior

• A four-year Bachelors degree in an engineering discipline or related applied science discipline (see approved list) from an ABET accredited institution, an International Engineering Alliance (IEA) recognized institution or an ABET Mutual Recognition Agreement (MRA)
• Plus eight (8) years working experience in Engineering-related positions.
  
  

 Approved degrees: Materials Science/Metallurgy, Physics, Chemistry, Nuclear, Electrical, Mechanical, Civil, Electronics, Computer Science, Environmental, Chemical, Structural. (A four-year bachelor of Engineering Technology degree is not considered an automatic equivalent for a B.S. degree in Engineering. A review of the degree program curriculum must be completed by Engineering department management.) 

Major Accountabilities - Engineer II

1) Analyzes and prepares a variety of data, technical reviews and evaluations, trend analyses, short to long-range technology assessments, products and services, investigations, product/specification verifications to aid decision making.  May present findings to a diverse group of management, internal staff, customers, vendors, etc.

2) Identifies, communicates and advocates resolution of technical concerns while adhering to sound engineering principles during evaluation / resolution of the conditions.  Challenges conditions and decisions when needed to ensure plant systems, engineering designs, project controls and oversight of work has high technical quality, is cost effective, in compliance with established standards, codes and regulations, maintains future reliability, satisfies customer requirements, budget and schedules to meet or exceed all reasonable or agreed upon customer service levels.

3) Interfaces with customers or cross organizational team members to assess their needs, determine the scope of the project, obtain necessary data to make key decisions which may require consultation with external or internal customers or employees.

4) May provide oversight of engineering technical programs by managing the program requirements, working with cross organizational partners, reviewing and internalizing operating experience and coordinating corrective actions to ensure engineering program elements continue to remain healthy. 

5) Provides support for projects and modifications that will increase operating efficiency.  May review design and documentation of projects to ensure compliance with design specifications, schedules and any regulatory requirements.

6) May assume responsibility for small- to medium-scale projects which include planning, designing, scheduling and coordinating all facets of the project. 

7) Checks and reviews standard analysis, evaluations, and investigations of others.

8) May provide technical guidance and leadership to less experienced engineers.

9) Remains cognizant of current technology and engineering developments as well as industry and competitive developments.  Maintains high individual level of engineering technical capabilities and expertise by formal education, self-study, and awareness of technology advances.

Major Accountabilities - Engineer III

1) Prepares engineering plans, designs, analysis, specifications, cost estimates, evaluations, studies, technical reviews, investigations and verifications.  Complies with design, regulatory, operating and maintenance requirements.  Ensures engineering analyses, design, project control, schedule commitments, or oversight work is technically sound, cost effective, and in compliance with established standards, codes, and regulations.  Checks and reviews analysis, evaluations, and investigations of others.

2) Interfaces with customers and other departments to ensure project objectives are understood and that work scope meets customer requirements, budget and schedule.  Contacts customers and various levels of management to obtain or present technical data.  Presents the results of designs, studies projects (in terms of new techniques) or approaches to subordinates, colleagues, management and customers.

3) Enhances department performance and productivity and/or unit performance by formulating, coordinating, performing analysis and making recommendations for improvements. Provides technical assistance and guidance to department personnel to enhance department performance and productivity.

4) May provide oversight of engineering technical programs by managing the program requirements, working with cross organizational partners, reviewing and internalizing operating experience and coordinating corrective actions to ensure engineering program elements continue to remain healthy.

5) May assume responsibility for small- to medium-scale projects which include planning, designing, scheduling and coordinating all facets of the project.  Identifies potential schedule or quality problems and initiates corrective action.  Takes initiative to eliminate barriers and uses resources to ensure desired results.  May interface with outside agencies and regulatory authorities.

6) Provides technical guidance and leadership to less experienced engineers.

7) May participate in developing long-range strategies for significant site problems. 

8) Provides input to projects and recommends modifications to increase operating efficiency and/or reviews design and documentation of projects to ensure compliance with design specifications, schedules and any regulatory requirements.

9) Remains cognizant of current technology and engineering developments as well as industry and competitive developments.  

Major Accountabilities - Engineer Senior

1) Develops and applies unique solutions and applications to a broad range of technical issues and problems (solutions that typically require original and creative approaches). Makes decisions and recommendations that have a moderate to significant effect on the overall organization performance.

2) Prepares complex engineering plans, designs, analysis, specifications, cost estimates, evaluations, studies, technical reviews, investigations and verifications. Ensures engineering analyses, design, project control, schedule commitments or oversight work is technically sound, cost effective, and in compliance with established standards, codes, and regulations. Checks and reviews analysis, evaluations, and investigations of others.

3) Integrates the many interrelated elements of complex projects that are broad in scope, require considerations not previously encountered and requires interpretation and/or modification to guidelines. Complies with design, regulatory, operating and maintenance requirements. Identifies potential schedule or quality problems and initiates corrective action.

4) Interfaces with customers and other departments to ensure project objectives are understood and that work scope meets customer requirements, budget and schedule. Contacts customers and various levels of management to obtain or present technical data. Presents the results of designs, studies projects (in terms of new techniques) or approaches to subordinates, colleagues, management and customers.

5) Provides technical guidance, leadership and support to less experienced engineers.

6) Assists the organization in problem solving, as needed, by critically challenging assumptions and decisions to ensure the most optimal solutions and strategies are implemented. Assists in developing long-range strategies for significant site problems.

7) Leverages industry and organization resources to resolve key technical issues. Develops a path forward to address these issues including bridging strategies. May interface with outside agencies and regulatory authorities.

8) May plan and coordinate programs and large-scale engineering projects or multiple medium-scale projects while acting as a technical specialist for a specific engineering field. May be responsible for: all aspects of work scope; directing consultants; conducting feasibility studies; determining staff, cost estimates and resource requirements; and recommending engineering criteria.

9) Monitors projects and recommends modifications to increase operating efficiency and /or reviews design and documentation of complex projects to ensure compliance with design specifications, schedules and any regulatory requirements. May develop, negotiate and manage contracts and contract revisions.

10) May research new developments and technology and make recommendations to management on their feasibility for Company operations.

Export Compliance / EEO Statement

This position may require access to and/or use of information subject to control under the Department of Energy's Part 810 Regulations (10 CFR Part 810), the Export Administration Regulations (EAR) (15 CFR Parts 730 through 774), or the International Traffic in Arms Regulations (ITAR) (22 CFR Chapter I, Subchapter M Part 120) (collectively, 'U.S. Export Control Laws'). Therefore, some positions may require applicants to be a U.S. person, which is defined as a U.S. Citizen, a U.S. Lawful Permanent Resident (i.e. 'Green Card Holder'), a Political Asylee, or a Refugee under the U.S. Export Control Laws. All applicants will be required to confirm their U.S. person or non-US person status. All information collected in this regard will only be used to ensure compliance with U.S. Export Control Laws, and will be used in full compliance with all applicable laws prohibiting discrimination on the basis of national origin and other factors. For positions at Palo Verde Nuclear Generating Stations (PVNGS) all openings will require applicants to be a U.S. person.

Pinnacle West Capital Corporation and its subsidiaries and affiliates ('Pinnacle West') maintain a continuing policy of nondiscrimination in employment. It is our policy to provide equal opportunity in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations. This policy of nondiscrimination shall include, but not be limited to, recruiting, hiring, promoting, compensating, reassigning, demoting, transferring, laying off, recalling, terminating employment, and training for all positions without regard to race, color, religion, disability, age, national origin, gender, gender identity, sexual orientation, marital status, protected veteran status, or any other classification or characteristic protected by law.

For more information on applicable equal employment regulations, please refer to EEO is the Law poster. Federal law requires all employers to verify the identity and employment eligibility of every person hired to work in the United States, refer to E-Verify poster. View the employee rights and responsibilities under the Family and Medical Leave Act (FMLA).

In compliance with the Drug Free Workplace Act of 1988, the Company is committed to a work environment that is free from the effects of alcohol and controlled substances, and free from the abuse or inappropriate use of prescribed and over-the-counter medications. The Company requires employees to be subject to drug and alcohol testing that is job-related and consistent with business necessity, regulatory requirements and applicable laws.